PRE-built packages

A full hand wash of the exterior, including the wheels and windows, finished with a liquid wax application to keep it shining longer.  Not all vehicles will require a clay bar treatment prior to wash but all are welcome to purchase a clay bar treatment to ensure the protection of the paint.  In extreme cases, a clay treatment will be required prior to the vehicle being washed for the protection of the paint. 

Complete three stage headlight restoration to bring foggy headlights back to life. 

Rotary tools will be used with the utmost care to safely wet sand the layers of plastic on the headlight that have been scuffed and faded over time to expose a fresh layer of plastic.  This new layer of plastic is then polished to present the clearest, most transparent medium to allow the best beam throw possible.  This freshly polished plastic is then sealed and waxed to ensure that the results are as long lasting as possible and to protect the headlights from the elements.  In extreme cases, or if the headlights have been restored many times before, it may not be possible to fully restore the appearance of the headlight without replacing the headlight itself.  This is not a service we offer at this time, however, in such a circumstance we will be able to use appropriate judgment and clean the headlight to the best of our abilities without risking the integrity of the headlight.

All chrome is polished by hand using a fresh microfiber applicator to bring back its' stunning shine. 

In order to ensure the safety of the surrounding paint, all chrome is polished by hand without the use of any dangerous rotary equipment.  This is to eliminate the chances of throwing chrome polish onto the paint causing possible contamination.  This is also done to protect the paint from coming in contact with any tools spinning or moving at a high RPM almost certainly causing damage.  

The exterior of the vehicle will receive a clay bar treatment to remove large contaminates.  This is most often used prior to washing particularly contaminated paint or windows.  

First, the area to be treated is rinsed with low pressure water to lubricate the surface.  Then the clay application is rubbed in small, uniform motions, using very light contact.  No pressure is applied to this process.  Instead, the soft and sticky surface of the clay is allowed to trap and grab the large bits of debris embedded in the paint or glass and pull them out without dragging them out, in order to ensure the integrity of the surface.  

Not all vehicles will require a clay bar treatment prior to being washed, but all are welcome to purchase a clay bar treatment to ensure the safety of the paint.  In extreme cases, a clay treatment will be required prior to the vehicle being washed for the protection of the paint.  Large debris and contamination such as debris trapped in tree sap, all other kinds of tree or foliage droppings, animal feces, dead insects, heavy dirt accumulation, intense pollen buildup, etc. can and VERY often will cause damage to the paint of the vehicle if not removed using the proper sequence of steps as well as taking the upmost care to not allow surface abrasion an opportunity to take place. 

All seats and seatbelts are cleaned and washed.  Seats are then shampooed using an upholstery safe extractor.  Allow some drying time before the seats are fully dry.

First we remove as much surface contamination as possible with non abrasive brushes and a vacuum.  The seats then get pre-soaked in a light solution in order to release the debris and any stains that may be present.  Finally, the seats get shampooed with a carpet and upholstery shampoo extractor.

Leather interiors can last a lifetime if well maintained.  To do this, we start by cleaning the surface debris with non abrasive brushes and vacuum.  The leather then gets washed with a light, leather safe, solution by hand without the use of potentially damaging machines.  Finally, the leather is wiped dry and a final coat of leather care and conditioning solution is applied to ensure the leather stays healthy and prevents the drying and cracking that plagues all leather interiors.  These solutions can be slick, at first, because of this we will NEVER apply this solution to any leather steering wheels.  Instead, we will only wash and sanitize leather steering wheels.

All hard surfaces are cleaned and sanitized by hand using non abrasive brushes to work the cleaning solution into the areas where the dirt and debris is hiding to lift it to the surface and float it off the materiel order to wipe it away.  This s followed by another coat of all surface safe sanitizer and a final coat of the appropriate conditioning solution for the type of material being cleaned.

All removable mats are removed.  Cloth mats are brushed, vacuumed, shampooed and sanitized.  Rubber mats are brushed and soaked in a solution to chemically remove dirt and organic material from the surface.  This process is repeated with agitation until the mats are as clean as possible.  Finally, they are conditioned with the appropriate solution for the material.  Some solutions may result in a slippery surface.  For this reason, we will NEVER apply a solution that we deem unsafe for your floor mats or pedals.